Do this several times before proceeding to the next step. Run the wipe through the surface slowly, and make sure to cover everything in a straight line. Baby wipes and lint rollers, and sometimes a good old-fashioned soap and water should work wonders in making your Cricut mat look restored and ready for cutting. Lint rollers serve to fulfill two functions. Sometimes, the one-two combination of baby wipes and lint rollers is enough to remove mild build-up. Allow the mat to soak for around 5 to 10 minutes before taking it out.
You can also use a sponge, a Magic Eraser or an adhesive remover for particular debris. Just make sure to read the instructions that come with the cleaning product. Wait for the mat to be completely dry before using it again. Using a towel, tissue or paper will be counter-intuitive as small bits will stick to the surface and minimize overall effectiveness. These are all available at retail craft stores and online shops and are fairly inexpensive.
Keep in mind that each product may have different instructions of use, so make sure to read them before anything else. Once you cover the mat in dish soap and warm water, scrub it to remove the excess shortening. You may need to scrub the surface of the mat a bit with a normal dish sponge or brush to remove any excess shortening. You should only use cleaners on it that are non-toxic and safe for contact with kitchen equipment, so using warm water and dish soap works well on these mats.
Like all other Cricut mats, the Cricut Cake mats should be left out to dry after they are washed. Once completely dry, they can be used again in your machine. Don't use a towel to dry your mat. This can leave fibers on the surface of the mat, which will be transferred to the frosting, fondant, or gum paste you cut.
Method 3. Remove the original sticky layer with rubbing alcohol or stickiness remover. To get new adhesive to stick to your mat, it's a good idea to remove the layer that has lost its stickiness. You can do this by covering the surface with rubbing alcohol or a stickiness removing product, such as Goo Gone. Tape off the edges of the mat.
The edges of a Cricut mat need to be free of stickiness, as this is the part of the mat that is pulled through the machine's rollers. To ensure that you don't get any adhesive on these areas, you should tape them off with painter's tape or masking tape. The area that you need to tape off is clearly marked on the mat with color. The colored areas are on all 4 edges outside of the grid pattern.
Cover the surface with a repositionable adhesive. There are a variety of adhesive products that people use to rejuvenate their mats. They are available at craft stores and from online retailers. Some can be sprayed over the surface and some need to be brushed on, but all should be applied in coats. Some adhesives that work well include: Repositionable scrapbooking glue Repositionable glue sticks Quilt basting spray Tacky glue thinned out with an equal part of water Repositionable spray adhesive.
Let the adhesive dry thoroughly. This will ensure that the adhesive is bonded to the mat properly and that it doesn't stick too much to the paper you are cutting. Once the mat is dry, remove the tape and use the mat. Sarah Stearns. Use a scraper tool or lint roller to get rid of any fuzz stuck to your Cricut mat.
Not Helpful 0 Helpful 0. You should try cleaning your Cricut mat when it starts getting dirty and losing its stickiness. Include your email address to get a message when this question is answered.
Be aware that adding stickiness to your Cricut mats may void any warranties that the Cricut machine comes with. In most cases, your machine is warrantied for 1 year from the date of purchase. Helpful 0 Not Helpful 0. Related wikiHows How to. How to. DIY Specialist. Expert Interview. About This Article. Co-authored by:.
It's always there for you—no matter what you're working on. It can help you through just about any project you set your mind to, from trendy shoes to a paper bouquet that will never wilt.
And that's why it should come as no surprise that your cutting mat will eventually start to wear and, inevitably, begin to lose its stickiness. Still, there's a bit of good news: Like maintaining any machine , all it needs is a little cleaning. But with some regular attention, you can keep your mat in tip-top shape for a very long time; ultimately, saving you both time and money by eliminating another trip to the store. Here's how.
This prevents environmental items, like dust and dog hair, from inadvertently sticking to your mat. This is especially true if you're cutting materials that leave high amounts of debris, such as like denim or glitter vinyl. If you're cutting standard items— things like vinyl and paper —you don't have to clean your mats quite that often. Use your best judgement, and when in doubt, give it a clean using the following directions.
0コメント